Settings - Tray & ODS - System Tray

Please read:

It seems it's not always clear, but to get an icon in the system tray, go to the temperature tab, select the sensor you want to see in the tray, then press the visual button for that sensor and check the box "Display temperature in systemtray".

Rotate Icons in system tray

If you check this box then any temperature icon you have set to be shown in the system tray will now be pilled up into 1 icon and rotated at every interval

Use horizontal lines in the system tray

If you check this box the icon will be displayed with the 2 lines, uncheck it to remove the lines

Replace icons on system tray after (0 = not)

If you have a lot of items loading into the tray at startup you can set this value to say 10 or 15 seconds, the icons will then be replaced so they will always line up to the right of the tray

Use a windows font instead of the MBM 5 fixed font in the system tray (not supported)

This is a non supported option, which means it works and that is it, I won't update or change it. The option to show the values from right to left & mirrored is not supported.

If you check this option then the tray icons will be drawn using the selected font.

• If you display values in Celcius then they will never pass 2 digits and the font Arial with a size of 8 should be fine.
• If you display values in Fahrenheit then you might encounter values of 3 digits, in that case the Terminal font with a size of 6 should be fine.

Font type & size

By pressing the font button you can select which font you want to use for the above option. Only font and size are used from your selection.